A non-contact end-effector for the handling of garments

Babur  Ozcelik; Fehmi  Erzincanli

doi:10.1017/S0263574702004125

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

In order to handle a material with either a delicate surface or an air permeable structure, a novel nozzle was designed and developed. This nozzle utilises the phenomena of the radial air outflow. It is envisaged that this new nozzle will handle materials by eliminating surface marking and air permeable structure problems.

Crossref Citations

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

Ozcelik, Babur Erzincanli, Fehmi and Findik, Fehim 2003. Evaluation of handling results of various materials using a non‐contact end‐effector. Industrial Robot: An International Journal, Vol. 30, Issue. 4, p. 363.

Ozcelik, Babur and Erzincanli, Fehmi 2005. Examination of the movement of a woven fabric in the horizontal direction using a non-contact end-effector. The International Journal of Advanced Manufacturing Technology, Vol. 25, Issue. 5-6, p. 527.

Davis, S. King, M.G. Casson, J.W. Gray, J.O. and Caldwell, Darwin G 2007. End Effector Development for Automated Sandwich Assembly. Measurement and Control, Vol. 40, Issue. 7, p. 202.

Rawal, B. R. Pare, Vinod and Tripathi, Kartikeya 2008. Development of noncontact end effector for handling of bakery products. The International Journal of Advanced Manufacturing Technology, Vol. 38, Issue. 5-6, p. 524.

Davis, S. Gray, J.O. and Caldwell, Darwin G. 2008. An end effector based on the Bernoulli principle for handling sliced fruit and vegetables. Robotics and Computer-Integrated Manufacturing, Vol. 24, Issue. 2, p. 249.

Brun, Xavier F. and Melkote, Shreyes N. 2009. Modeling and Prediction of the Flow, Pressure, and Holding Force Generated by a Bernoulli Handling Device. Journal of Manufacturing Science and Engineering, Vol. 131, Issue. 3,

Becker, Aaron Sandheinrich, Robert and Bretl, Timothy 2009. Automated manipulation of spherical objects in three dimensions using a gimbaled air jet. p. 781.

Brun, X. and Melkote, S. N. 2012. Effect of Substrate Flexibility on the Pressure Distribution and Lifting Force Generated by a Bernoulli Gripper. Journal of Manufacturing Science and Engineering, Vol. 134, Issue. 5,

Manuello Bertetto, Andrea Ricciu, Roberto and Badas, Maria Grazia 2014. A mechanical saffron flower harvesting system. Meccanica, Vol. 49, Issue. 12, p. 2785.

Zhao, Jianghong and Li, Xin 2016. Effect of supply flow rate on performance of pneumatic non-contact gripper using vortex flow. Experimental Thermal and Fluid Science, Vol. 79, Issue. , p. 91.

Zhao, Jianghong Li, Xin and Bai, Jin 2018. Experimental study of vortex suction unit-based wall-climbing robot on walls with various surface conditions. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 232, Issue. 21, p. 3977.

Furumoto, Takuro Hasegawa, Keisuke Makino, Yasutoshi and Shinoda, Hiroyuki 2019. Three-Dimensional Manipulation of a Spherical Object Using Ultrasound Plane Waves. IEEE Robotics and Automation Letters, Vol. 4, Issue. 1, p. 81.

ERTÜRK, ŞENOL and ERZİNCANLI, Fehmi 2019. Grasping of Soft Tissues By Means Of Non-Contact Gripper In Minimally Invasive Surgery. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Vol. 7, Issue. 3, p. 1335.

ERTÜRK, Şenol and ERZİNCANLI, Fehmi 2020. Sıkma Kuvveti Uygulamadan Değişken Şekilli Yumuşak Dokuların Kavranması İçin Yeni Bir Laparoskopik Tutucu Tasarımı ve Uygulanabilirlik Testleri. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Vol. 8, Issue. 3, p. 2084.

Savkiv, Volodymyr Mykhailyshyn, Roman Duchon, Frantisek Prentkovskis, Olegas Maruschak, Pavlo and Diahovchenko, Illia 2020. TRANSBALTICA XI: Transportation Science and Technology. p. 504.

Savkiv, Volodymyr Mykhailyshyn, Roman Duchon, Frantisek and Maruschak, Pavlo 2020. TRANSBALTICA XI: Transportation Science and Technology. p. 263.

Digumarti, Krishna Manaswi Cacucciolo, Vito and Shea, Herbert 2021. Dexterous textile manipulation using electroadhesive fingers. p. 6104.

Savkiv, Volodymyr Mykhailyshyn, Roman Maruschak, Pavlo Kyrylovych, Valerii Duchon, Frantisek and Chovanec, Ľuboš 2021. GRIPPING DEVICES OF INDUSTRIAL ROBOTS FOR MANIPULATING OFFSET DISH ANTENNA BILLETS AND CONTROLLING THEIR SHAPE. Transport, Vol. 36, Issue. 1, p. 63.

Liu, Hanbang Li, Xinrong Ma, Qianli and Feng, Wenqian 2021. Development non-contact gripper with flowrate-amplification using Coanda ejector. Vacuum, Vol. 187, Issue. , p. 110108.

Mykhailyshyn, Roman Savkiv, Volodymyr Maruschak, Pavlo and Xiao, Jing 2022. A SYSTEMATIC REVIEW ON PNEUMATIC GRIPPING DEVICES FOR INDUSTRIAL ROBOTS. Transport, Vol. 37, Issue. 3, p. 201.

Download full list

Article contents

A non-contact end-effector for the handling of garments

Abstract

Keywords

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

Article contents

A non-contact end-effector for the handling of garments

Abstract

Keywords

Save article to Kindle

Save article to Dropbox

Save article to Google Drive

Reply to: Submit a response

Your details

You have entered the maximum number of contributors

Conflicting interests