Hostname: page-component-745bb68f8f-d8cs5 Total loading time: 0 Render date: 2025-02-11T09:56:50.770Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Stability of Self-Supported Metallic Multilayered Thin Films

Published online by Cambridge University Press:  21 March 2011

A. Misra ,
H. Kung  and
R.G. Hoagland
A. Misra
Affiliation:
Materials Science and Technology Division, MS G755, Los Alamos National Laboratory, Los Alamos, NM 87545
H. Kung
Affiliation:
Materials Science and Technology Division, MS G755, Los Alamos National Laboratory, Los Alamos, NM 87545
R.G. Hoagland
Affiliation:
Materials Science and Technology Division, MS G755, Los Alamos National Laboratory, Los Alamos, NM 87545
Get access

Abstract

The morphological stability and strength retention following elevated temperature exposure or thermal cycling will be crucial in exploiting the extremely high strengths of nanolayered materials in advanced engineering applications. The effects of elevated temperature (≤800°C) vacuum annealing on the morphological stability and mechanical properties of sputter deposited Cu-Nb multilayers with 75 nm bilayer period are reported here. Even after 800°C/ 1 hour anneal, the continuity of the layered structure is maintained and the bilayer periods are unchanged. The in-plane grain sizes in both Cu and Nb coarsened but were anchored at grooved boundaries preventing further growth. For a constant bilayer period, the effect of increasing the in-plane grain size on the multilayer hardness is found to be insignificant. After annealing, the layers are observed to be offset by shear along a vertical plane at the triple point junctions that have equilibrium groove angles aligned in a zig-zag pattern. A new mechanism is proposed for the evolution of this “anchored” structure that is resistant to further morphological instability.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 695: Symposium L – Thin Films: Stresses and Mechanical Properties IX , 2001 , L13.9.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Clemens, B.M., Kung, H. and Barnett, S.A., MRS Bulletin, 24, 20, February (1999).Google Scholar
2. Misra, A. and Kung, H., Advanced Engineering Materials, 217, April (2001).Google Scholar
3. Malzahn, J.C. Kampe, Courtney, T.H. and Leng, Y., Acta Metall., 37, 1735 (1989)Google Scholar
4. Sharma, G., Ramanujan, R.V. and Tiwari, G.P., Acta Mater., 48, 875 (2000).Google Scholar
5. Josell, D. and Spaepen, F., MRS Bulletin, 24, 39, February (1999).Google Scholar
6. Hoagland, R.G., Mitchell, T.E., Hirth, J.P. and Kung, H., Phil Mag A, 2002, in press.Google Scholar
7. Rayleigh, Lord, Proc. London Math. Soc., 10, 4 (1878).Google Scholar
8. Sridhar, N., Rickman, J.M. and Srolovitz, D.J., Acta Mater., 45, 2715 (1997).Google Scholar
9. Lewis, A.C., Mann, A.B., Heerden, D. van, Josell, D. and Weihs, T.P., Mat. Res. Soc. Symp. Proc., 652 (2001), in press.Google Scholar