Hostname: page-component-6bf8c574d5-8gtf8 Total loading time: 0 Render date: 2025-02-14T12:07:55.618Z Has data issue: false hasContentIssue false
  • English
  • Français

S-Passivated InP Surfaces Prepared by (NH4)2S Treatments

Published online by Cambridge University Press:  25 February 2011

Y. Tao ,
A. Yelon ,
E. Sacher ,
Z.H. Lu  and
M.J. Graham
Y. Tao
Affiliation:
Group de Couches Minces and Dépt. de Génie Phys, Ecole Polytechnique de Montréal, C.P. 6079, Succursale “A”, Montréal, Québec, H3C 3A7, Canada
A. Yelon
Affiliation:
Group de Couches Minces and Dépt. de Génie Phys, Ecole Polytechnique de Montréal, C.P. 6079, Succursale “A”, Montréal, Québec, H3C 3A7, Canada
E. Sacher
Affiliation:
Group de Couches Minces and Dépt. de Génie Phys, Ecole Polytechnique de Montréal, C.P. 6079, Succursale “A”, Montréal, Québec, H3C 3A7, Canada
Z.H. Lu
Affiliation:
Institute for Microstructural Science, National Research Council of Canada, M12 Montreal Road, Ottawa, Ontario, KIA 0R9, Canada
M.J. Graham
Affiliation:
Institute for Microstructural Science, National Research Council of Canada, M12 Montreal Road, Ottawa, Ontario, KIA 0R9, Canada
Get access

Abstract

S-terminated InP(100) surfaces which are chemically clean and stable were obtained by sulfide solution treatments. X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) were used to investigate the thermal and chemical stability of the surfaces. Schottky diodes based on S-passivated InP(100) wafers were used as test devices tostudy the surface electrical properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 259: Symposium B – Chemical Surface Preparation, Passivation and Cleaning for Semiconductor Growth and Processing , 1992 , 293
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1) Sandroff, C. J., Nottenburg, R. N., Bischoff, J. C., and Bhat, R., Appl. Phys. Lett. 51, 33 (1987)CrossRefGoogle Scholar
2) Yablonovitch, E., Sandroff, C. J., Bhat, R., and Gmitter, T. Appl. Phys. Lett. 51, 439, (1987)CrossRefGoogle Scholar
3) Iyer, R., Chang, R. R., and Lile, D. L., Appl. Phys. Lett. 53, 134 (1988)CrossRefGoogle Scholar
4) Wilmsen, C. W., Geib, K. M., Shin, J., Iyer, R., and Lile, D. L. J. Vac. Sci. Technol. B7, 851 (1989)CrossRefGoogle Scholar
5) Sandroff, C. J., Hegde, M. S., and Chang, C. C., J. Vac. Sci. Technol. B7, 841 (1989)CrossRefGoogle Scholar
6) Wilmsen, C. M., Kirschner, P. D., Baker, J. M., McInturff, D. M., Fetti, G. D. and Woodall, J. M., J. Vac. Sci. Technol. B6, 1180 (1988)CrossRefGoogle Scholar
7) Tao, Y., Yelon, A., Sacher, E., Lu, Z. H., and Graham, M. J., Appl.Phys.Lett. (in press)Google Scholar
8) Lu, Z. H., Graham, M. J., Feng, X. H., and Yang, B. X., Appl. Phys. Lett.(in press)Google Scholar
9) Lu, Z. H., Tao, Y., Yang, B. X., Feng, X. H., Mitchell, D. F., Yelon, A., Graham, M. J., and Sacher, E., Proc. of 1992 MRS Spring Meeting (San Francisco, U.S)Google Scholar