Hostname: page-component-6bf8c574d5-xtvcr Total loading time: 0 Render date: 2025-02-15T09:10:31.808Z Has data issue: false hasContentIssue false
  • English
  • Français

Some Aspects Of The Rapid Solidification Of Light Alloys

Published online by Cambridge University Press:  21 February 2011

H. Jones
H. Jones*
Affiliation:
Department of Metallurgy, University of Sheffield, Sheffield Sl 3JD, England.
Get access

Abstract

The engineering light metals, especially aluminium and magnesium, exhibit limitations in alloying behaviour and performance that identify them as particular targets for development via rapid solidification. The present contribution reviews recent work in the author's group aimed at advancing understanding of both alloying and processing, including:

(1) parametric mapping as a guide to extension of phase fields

(2) prediction and application of observed characterisation of binary and ternary extended solid solutions

(3) optimisation and control of conditions during rapid solidification and consolidation,

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 28: Symposium F – Rapidly Solidified Metastable Materials , 1983 , 303
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Furrer, P. and Warlimont, H., Z. Metallkunde, 62, 12–20, 100–112 (1971).Google Scholar
2. Anantharaman, T.R., Ramachandrarao, P., Suryanarayana, C., Lele, S. and Chattopadhyay, K., Trans. Indian Inst. Met., 30, 423, 434, (1977).Google Scholar
3. Jones, H., Aluminium, 54, 274–281 (1978).Google Scholar
4. Frausto, P.R., Jackson, A.G., Clauer, A.H. and McCall, J.L. in: Microstructural Science, Vol. 10, White, W.E. et al. , eds. (Elsevier, New York 1982) pp.103–112.Google Scholar
5. Kovneristyi, Yu. K., Bolotina, N.P., Kazarin, V.I. and Nagorbina, L.A., Izv. Akad. Nauk. SSSR Met., 1982 No. 4 pp.117-Google Scholar
6. Konitzer, D.G., Muddle, B.C. and Fraser, H.L., Scripta Met., 17, 963–6 (1983) & this meeting, Paper F6.7.10.1016/0036-9748(83)90271-5Google Scholar
7. Broderick, T.F. and Froes, F.H., this meeting, Paper F6.6.Google Scholar
8. Whang, S.H. and Chi, C.S., this meeting, Paper F6.8.Google Scholar
9. Masur, L.J., Burke, J.T., Kattamis, T.Z. and Flemings, M.C. in: Rapidly Solidified Amorphous and Crystalline Alloys, Kear, B.H. et al. , eds. (Elsevier, New York, 1982) pp. 185–189 Google Scholar
10. Meschter, P.J. and O'Neal, J.E., AIME Atlanta meeting, March 1983 (J. Metals, 1982, 34 (12) Suppl. p.45).Google Scholar
11. Hume-Rothery, W., Mabbot, G.W. and Channel-Evans, K.M., Phil. Trans. Royal Soc., London, Ser. A, 233, 1 (1934).10.1098/rsta.1934.0014Google Scholar
12. Darken, L. and Gurry, R., Physical Chemistry of Metals (McGraw-Hill, New York, 1952) pp.86–90.Google Scholar
13. Waber, J.T. in: Extractive Metallurgy of Plutonium and its Alloys (Wiley-Interscience, New York, 1960) p. 111–147.Google Scholar
14. Gschneidner, K.A. and Waber, J.T. in: The Rare Earths, Spedding, F.H. and Daane, A.H., eds. (Wiley, New York, 1961) pp. 386–427.Google Scholar
15. Waber, J.T., Gschneidner, K., Larson, A.C. and Price, M.Y., Trans. Met. Soc. AIME, 227, 717 (1963).Google Scholar
16. Chelikowsky, J.R., Phys. Rev. B19 686–701 (1979).10.1103/PhysRevB.19.686Google Scholar
17. Alonso, J.A. and Simozar, S., ibid., B22, 5583–5589 (1980).10.1103/PhysRevB.22.5583Google Scholar
18. Alonso, J.A., Lopez, J.M., Simozar, S. and Girifalco, L.A., Acta Met., 30, 105–107 (1982).10.1016/0001-6160(82)90050-5Google Scholar
19. Lopez, J.M. and Alonso, J.A., Physica, 113B, 103–112 (1982).Google Scholar
20. Jones, H., Mater. Sci. Eng., 51, L5–L8 (1983).10.1016/0025-5416(83)90038-1Google Scholar
21. Sood, D.K. and Dearnaley, G. in: Applications of Ion Beams to Materials, Carter, G., Colligan, G.S. and Grant, W.A., eds. (Inst. of Phys., London, (1976) pp.196–203.Google Scholar
22. Kaufmann, E.N., Vianden, R., Chelikowsky, J.R. and Phillips, J.C., Phys. Rev. Lett., 39, 1671–75 (1977).10.1103/PhysRevLett.39.1671Google Scholar
23. Sood, D.K., Phys. Lett., 68A, 469–472 (1978).10.1016/0375-9601(78)90632-1Google Scholar
24. Lopez, J.M. and Alonso, J.A., Phys. Stat. Sol. (a), 72, 777–781 (1982).10.1002/pssa.2210720242Google Scholar
25. Alonso, J.A. and Lopez, J.M., Phil. Mag. A, 45, 713–722 (1982).10.1080/01418618208236200Google Scholar
26. Pearson, W.B., The Crystal Chemistry and Physics of Metals and Alloys, (Wiley, New York, 1972) pp. 174–176.Google Scholar
27. Moreen, H.A., Taggart, R. and Polonis, D.H., Met. Trans., 2, 265–8 (1971).10.1007/BF02662668Google Scholar
28. Jones, H., Scripta Met., 17, 97–100 (1983).10.1016/0036-9748(83)90078-9Google Scholar
29. Bléztry, J., octoral Thesis, Orsay (1968);Google Scholar
J. Phys. Chem. Solids, 31, 1263–1272 (1970).10.1016/0022-3697(70)90129-0Google Scholar
30. Oćko, M. Babić, E. and Zlatić, V., Solid State Commun., 18, 705–8 (1976);10.1016/0038-1098(76)91765-8Google Scholar
Fizika, 8 Suppl., 204–5 (1976).Google Scholar
31. Jansen, C., Doctoral Thesis, Massachusetts Institute of Technology, 1971.Google Scholar
32. Bendijk, A., Delhez, R., Katgerman, L., De Keijser, Th. H, Mittemeijer, E.J. and Van Der Pers, N.M., J. Mater. Sci., 15, 2803–10 (1980).10.1007/BF00550549Google Scholar
33. Jones, H. in: Vacancies '76, Smallman, R.E. and Harris, J.E., eds. (The Metals Society, London, 1977) pp.175–184.Google Scholar
34. Sahin, E. and Jones, H. in: Rapidly Quenched Metals III, Cantor, B., ed. (The Metals Society, London, 1978) Vol. 1, pp. 138–146.Google Scholar
35. Jones, H. in: ‘Rapid Solidification Processing: Principles and Technologies’, Mehrabian, R. et al. , eds. (Claitor's, Baton Rouge, La. 1980) pp.306–316.Google Scholar
36. Pontikakos, I. and Jones, H., Metal Science, 16, 277–30 (1982).10.1179/030634582790427037Google Scholar
37. Jones, H., J. Mater. Sci. Lett., 1, 405–406 (1982).10.1007/BF00724853Google Scholar
38. Jones, H. as ref. 9, pp.71–79.Google Scholar
39. Savage, S.J. and Jones, H. in: Rapidly Quenched Metals, Masumoto, T. and Suzuki, K., eds. (The Japan Institute of Metals, Sendai, 1982) Vol. 1, pp.159–162.Google Scholar
40. Midson, S.P., Buckley, R.A. and Jones, H., ibid. pp.1521–1524.Google Scholar
41. Midson, S.P., Ph.D. Thesis, Sheffield, 1982.Google Scholar
42. Imanow, C., Gorczyca, S. and Przybylowicz, K., Archiw Hutnica, 17, 315–26 (1972).Google Scholar
43. Berman, S.I., Imanow, Kh. I. and Kasumadze, N.G., Izv. VUZ Tsvetn. Met., 1974, No.5, p.141–144.Google Scholar
44. Elagin, V.I. and Fedorov, V.M., Russ. Met., 1977 No.5, p.193–198.Google Scholar
45. Jones, H., Mater. Sci. Eng., 5, 1–18 (1969).10.1016/0025-5416(69)90077-9Google Scholar
46. Nes, E., Acta Met., 20, 499–506 (1972).10.1016/0001-6160(72)90005-3Google Scholar
47. Thundal, B., Scand. J. Met., 2, 207–211 (1973).Google Scholar
48. Hori, S., Saji, S. and Kobayashi, T., J. Jap. Inst. Light Met., 37, 1134–8 (1973);10.2320/jinstmet1952.37.10_1134Google Scholar
Technol. Rep. Osaka University, 28, 359–367 (1978).Google Scholar
49. Melton, K.N., J. Mater. Sci., 10, 1651–4 (1975).10.1007/BF00554924Google Scholar
50. Dahl, W., Gruhl, W., Ibe, G., Burchard, W.G. and Dumitrescu, C., Z. Metallkunde, 68, 188–194 (1977).Google Scholar
51. Midson, S.P., Buckley, R.A. and Jones, H., in preparation for RQ5-Wurzburg, September 1984.Google Scholar
52. Jones, H., Mater. Sci. Eng., Special Issue, in press (1983).Google Scholar
53. Kim, M.H., Ph.D. Thesis, Sheffield 1982.Google Scholar
54. Lubanska, H., J. Metals, 22 No.2, 45–49 (1970).Google Scholar
55. Kim, M.H. and Jones, H., as ref. 38, pp. 8 5–8 8 (1982).Google Scholar
56. Annetts, S.E. and Clay, C.E., unpublished work, Sheffield 1982.Google Scholar
57. Savage, S.J. and Jones, H., Powder Metallurgy Annual Meeting Edinburgh Oct. 1983.Google Scholar
58. Singer, A.R.E., U.S. Patent 4224356, Sept. 23rd, 1980.Google Scholar
59. Singer, A.R.E. and Kisakurek, S.E., Metals Technol., 3, 5657–70 (1976).10.1179/030716976803391647Google Scholar
60. Singer, A.R.E., Hodkin, D.J., Sutcliffe, P.W. and Mardon, P.G., ibid., 10, 105–110 (1983).Google Scholar
61. Rickinson, B.A., Kirk, F.A. and Davies, D.R.G., Powder Met., 24, 1–6 (1981)10.1179/pom.1981.24.1.1Google Scholar