Hostname: page-component-6bf8c574d5-rwnhh Total loading time: 0 Render date: 2025-02-19T12:27:00.804Z Has data issue: false hasContentIssue false
  • English
  • Français

Process Modeling of Ti-6Al-4V SPM Materials

Published online by Cambridge University Press:  10 February 2011

S. S. Ahmed ,
G. Huang ,
H. Gegel  and
D. Barker
S. S. Ahmed
Affiliation:
UES Software Inc., 4401 Dayton-Xenia Rd., Dayton, OH 45432, shatil@engineer.com
G. Huang
Affiliation:
UES Software Inc., 4401 Dayton-Xenia Rd., Dayton, OH 45432, shatil@engineer.com
H. Gegel
Affiliation:
UES Software Inc., 4401 Dayton-Xenia Rd., Dayton, OH 45432, shatil@engineer.com
D. Barker
Affiliation:
UES Inc., 4401 Dayton-Xenia Rd., Dayton, OH 45432
Get access

Abstract

Structural Porous Metals (SPM) was specifically designed to offer large weight reductions in structural applications. The pores of gas are incorporated into the SPM during hot isostatic pressing. Since the gas in the pores are at high pressure and are closed isolated pores, SPM can be processed by standard methods such as rolling or forging without collapsing the gas pores. The objective of this paper is to show that the combination of computer simulation and intrinsic workability modeling provide a rapid and cost-effective way, for understanding the process and selecting the process parameters. This paper explains how SPM material data and developed material density updating scheme can be used in conjunction with the existing theory and FEM model.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 521: Symposium R – Porous & Cellular Materials for Structural Applications , 1998 , 249
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. ANTARESTM, Commercially available FEA Application for Bulk Forming, LUES Software Inc., Dayton, Ohio.Google Scholar
2. Barker, D., UES Inc., (private communication), regarding Test Rolling of SPM cans at WPAFB, 1997.Google Scholar
3. Barker, D., UES Inc., (private communication), regarding Compression Testing of LDC at WPAFB, 1997.Google Scholar
4. Chaudhary, A., and Doraivelu, S., Processing Science Research to Develop Fundamental Analytical, Physical, and Material Modeling Techniques for Difficult-to-Process Materials, (Report No. WL-TR-91-4018 Materials Directorate, Wright Laboratory, WPAFB, Ohio, 1990) p. F-29Google Scholar
5. Zhadannovich, G.M., Theory of Compacting of Metal Powders, translated from Teorizc Pressovaniya Metzllichaskikli Poroshkov, by the Foreign Technology Division, WPAFB, Ohio. U.S.A. (Translation No. FTD-HC-23-775-70, June, 1971), p. 1–262.Google Scholar
6. Kuhn, H.A., Deformation Process of Sintered Powder Metal, Powder Metallurgy Processing: New Techniques and Analysis, (Academic Press, New York, 1978), p. 99.Google Scholar
7. Gegel, H.L., Synthesis of Atomistics and Contnuum Modeling, edited by Arsenault, R.J., Beeler, J.R. Jr., and Esterling, D.M., (Computer Simulation in Material Science, ASM International, 1988), p.291–344.Google Scholar