Hostname: page-component-6bf8c574d5-h6jzd Total loading time: 0.001 Render date: 2025-02-15T10:42:39.417Z Has data issue: false hasContentIssue false
  • English
  • Français

Oxide and Nitride Formation and Segregation of Metals During Oxygen and Nitrogen Bombardment of Silicon

Published online by Cambridge University Press:  10 February 2011

J. S. Williams ,
M. Petravic ,
M. Conway ,
L. Fu  and
D. J. Chivers
J. S. Williams
Affiliation:
Department of Electronic Materials Engineering, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT, 0200, Australia
M. Petravic
Affiliation:
Department of Electronic Materials Engineering, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT, 0200, Australia
M. Conway
Affiliation:
Department of Electronic Materials Engineering, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT, 0200, Australia
L. Fu
Affiliation:
Department of Electronic Materials Engineering, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT, 0200, Australia
D. J. Chivers
Affiliation:
AEA Technology, Harwell, Didcot, Berks., U.K.
Get access

Abstract

This study compares oxide and nitride formation during oxygen and nitrogen bombardment of Si. Ion bombardment is carried out both in a SIMS machine and in a conventional implanter at various temperatures. Stoichiometric SiO2 and slightly N-rich Si3N4 are formed during bombardment even at cryogenic temperatures. Implanted metals were found to have a strong tendency to be segregated at a moving Si-SiO2 interface during oxygen bombardment but little segregation is observed at a Si-Si3N4 interface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 504: Symposium KK – Atomistic Mechanisms in Beam Synthesis & Irradiation… , 1997 , 153
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Williams, J.S., Petravic, M., Svensson, B.G. and Conway, M., J.Appl.Phys. 76 (1995) 1840.Google Scholar
2. Petravic, M., Williams, J.S., Svensson, B.G. and Conway, M., SIMS XI, Orlando, Florida (1997) to be published in proceedings.Google Scholar
3. Menzel, N. and Wittmaack, K., Mat.Sci.Eng. B12 (1992) 91.Google Scholar
4. Vandervorst, W., Alay, J., Brijs, B., DeCoster, W. and Elst, K., Proc. SIMS IX, ed.Benninghoven, A. et al. (Wiley, N.Y., 1994) p.599.Google Scholar
5. Kilner, J.A., McPhail, D.S. and Littlewood, S.D., Nucl.Instrum.Meth. B64(1992) 632.Google Scholar
6. Williams, J.S., Short, K.T. and White, A.E., Appl.Phys.Lett. 70 (1997) 426.Google Scholar
7. Petravic, M., Svensson, B.G., Williams, J.S. and Glasko, J.M., Nucl.Instrum. Meth. B118 (1996) 151.Google Scholar
8. Kilner, J.A. etal. Nucl.Instrum.Meth B15 (1986) 214.Google Scholar
9. DeCoster, W., Brijs, B., Bender, H., Alay, J. and Vandervorst, W., Vacuum 45 (1994) 389.Google Scholar
10. See for example, Herbots, N. etal. in Low Energy Ion-Surface Interactions, ed. Rabalais, J.W. (John Wiley, Chichester, 1994) p. 389.Google Scholar