Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Gibson, L. J.
2000.
Mechanical Behavior of Metallic Foams.
Annual Review of Materials Science,
Vol. 30,
Issue. 1,
p.
191.
Nakajima, H
Hyun, S.K
Ohashi, K
Ota, K
and
Murakami, K
2001.
Fabrication of porous copper by unidirectional solidification under hydrogen and its properties.
Colloids and Surfaces A: Physicochemical and Engineering Aspects,
Vol. 179,
Issue. 2-3,
p.
209.
Shapovalov, V. I.
2002.
Hydrogen Materials Science and Chemistry of Metal Hydrides.
p.
141.
Yuan, Liu
and
Yanxiang, Li
2003.
A theoretical study of Gasarite eutectic growth.
Scripta Materialia,
Vol. 49,
Issue. 5,
p.
379.
Yuan, Liu
Yanxiang, Li
Jiang, Wan
and
Huawei, Zhang
2005.
Evaluation of porosity in lotus-type porous magnesium fabricated by metal/gas eutectic unidirectional solidification.
Materials Science and Engineering: A,
Vol. 402,
Issue. 1-2,
p.
47.
Drenchev, L.
Sobczak, J.
Malinov, S.
and
Sha, W.
2006.
Gasars: A class of metallic materials with ordered porosity.
Materials Science and Technology,
Vol. 22,
Issue. 10,
p.
1135.
Kato, Takeshi
Nakahata, Takuji
and
Nakajima, Hideo
2006.
Tribological Behaviour of Lotus-Type Porous Cast Iron.
MATERIALS TRANSACTIONS,
Vol. 47,
Issue. 9,
p.
2259.
Liu, Yuan
Li, Yanxiang
Wan, Jiang
and
Zhang, Huawei
2006.
Metal-gas eutectic growth during unidirectional solidification.
Metallurgical and Materials Transactions A,
Vol. 37,
Issue. 9,
p.
2871.
Sugiyama, Masayuki
Hyun, Soong-Keun
Tane, Masakazu
and
Nakajima, Hideo
2007.
Fabrication of Lotus-type Porous NiTi Shape Memory Alloys using the Continuous Zone Melting Method and Tensile Property.
High Temperature Materials and Processes,
Vol. 26,
Issue. 4,
Onishi, H.
Ueno, S.
Hyun, S.K.
and
Nakajima, H.
2009.
Fabrication of Lotus-Type Porous Cobalt and Silicon through Decomposition of Moisture.
Metallurgical and Materials Transactions A,
Vol. 40,
Issue. 2,
p.
438.
Suzuki, S
Kim, T-B
and
Nakajima, H
2009.
Fabrication of Al-Cu alloy with elongated pores by continuous casting technique.
Journal of Physics: Conference Series,
Vol. 165,
Issue. ,
p.
012068.
Kim, S.Y.
Park, J.S.
and
Nakajima, H.
2009.
Fabrication of Lotus-Type Porous Aluminum through Thermal Decomposition Method.
Metallurgical and Materials Transactions A,
Vol. 40,
Issue. 4,
p.
937.
Shapovalov, V. I.
and
Withers, J. C.
2009.
Carbon Nanomaterials in Clean Energy Hydrogen Systems.
p.
29.
Nakajima, H
Kim, S Y
and
Park, J S
2009.
Fabrication of porous aluminium with directional pores through thermal decomposition method.
Journal of Physics: Conference Series,
Vol. 165,
Issue. ,
p.
012063.
Kashihara, M.
Yonetani, H.
Kobi, T.
Hyun, S.K.
Suzuki, S.
and
Nakajima, H.
2009.
Fabrication of lotus-type porous carbon steel via continuous zone melting and its mechanical properties.
Materials Science and Engineering: A,
Vol. 524,
Issue. 1-2,
p.
112.
Wada, T.
Ide, T.
and
Nakajima, H.
2009.
Fabrication of Porous Iron with Directional Pores through Thermal Decomposition of Chromium Nitride.
Metallurgical and Materials Transactions A,
Vol. 40,
Issue. 13,
p.
3204.
Utsunomiya, Hiroshi
Yukimoto, Tsuyoshi
Sakai, Tetsuo
Suzuki, Shinsuke
and
Nakajima, Hideo
2010.
Deformation of Lotus-Type Porous Copper in Rolling.
Materials Science Forum,
Vol. 658,
Issue. ,
p.
328.
Kashihara, Makoto
Yonetani, Hiroshi
Suzuki, Shinsuke
and
Nakajima, Hideo
2010.
Effect of Addition of NiO Powder on Pore Formation in Lotus-Type Porous Carbon Steel Fabricated by Continuous Casting.
Materials Science Forum,
Vol. 658,
Issue. ,
p.
215.
Nakajima, H.
and
Suzuki, S.
2010.
Encyclopedia of Materials: Science and Technology.
p.
1.
Colombo, P.
and
Degischer, H. P.
2010.
Highly porous metals and ceramics.
Materials Science and Technology,
Vol. 26,
Issue. 10,
p.
1145.