Hostname: page-component-6bf8c574d5-qdpjg Total loading time: 0 Render date: 2025-02-19T12:36:20.231Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication and Properties of Syntactic Magnesium Foams

Published online by Cambridge University Press:  10 February 2011

M. Hartmann ,
K. Reindel  and
R. F. Singer
M. Hartmann
Affiliation:
Department of Material Science, University of Erlangen, Erlangen, Germany
K. Reindel
Affiliation:
Department of Material Science, University of Erlangen, Erlangen, Germany
R. F. Singer
Affiliation:
Department of Material Science, University of Erlangen, Erlangen, Germany
Get access

Abstract

Syntactic magnesium foams which consist of thin-walled hollow alumina spheres embedded in a magnesium matrix were fabricated by infiltrating a three-dimensional array of hollow spheres with a magnesium melt by using a gas pressure-assisted casting technique.

The resulting composite contains closed cells of homogeneous and isotropic morphology. The densities of the syntactic magnesium foams were between 1.0 and 1.4 g/cm3. The densities were controlled by variations in the bulk density of the hollow spheres with the volume fraction of spheres kept constant at approximately 63 %.

Compressive deformation characteristics of the composites were evaluated with respect to the influence of matrix strength and sphere wall thickness on characteristic variables such as compressive strength, plateau stress and energy absorption efficiency. Differences in the strength of the magnesium-based matrix materials investigated (cp-Mg, AM20, AM50, AZ91) had little influence on the compressive strength of the syntactic foam. However, an increasing relative wall thickness of the hollow ceramic spheres led to a significant strength enhancement. In all cases the ratio between compressive and plateau strength rose with increasing composite strength resulting in decreasing energy absorption efficiency.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 521: Symposium R – Porous & Cellular Materials for Structural Applications , 1998 , 211
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Davies and Shu Zhen, G. J., J. Mat. Science 18, pp. 1899–1911(1983),.Google Scholar
2. Drury, W. J., Rickles, S. A., Sanders, T. H. Jr., Cochran, J. K., in Light-Weight Alloys for Aerospace Applications, edited by Lee, E. W., Chia, E. H. and Kim, N. J. (The Minerals, Metals & Materials Society, 1989), pp. 311–322.Google Scholar
3. Rawal, S. P., Lanning, B. R., Misra, M. S., in Metal Matrix Composites. edited by A., Miravete (Proc. of the 9th Int. Conf. on Composite Materials (ICCM/9), Madrid, 1993), pp. 203–210.Google Scholar
4. Lanning, B. R., Rawal, S. P., Misra, M. S., in Advanced Metal Matrix Composites for Elevated Temperatures, edited by Gungor, M. N. et al. (Conf. Proc., Cincinnati, Ohio, USA, 1991), pp. 79–83.Google Scholar
5. Torobin, L. B., U.S. Patent No. 4 671 909 (9 June 1987).Google Scholar
6. Hartmann, M., Singer, R. F., in Metallschdume, edited by J., Banhart (Conf. Proc., Verlag MIT, Bremen, 1997), pp. 39–57.Google Scholar