Hostname: page-component-6bf8c574d5-2jptb Total loading time: 0 Render date: 2025-02-16T01:27:19.219Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Softbake Parameters on a Benzocyclobutene (BCB) Adhesive Wafer Bond

Published online by Cambridge University Press:  01 February 2011

Daniel N. Pascual
Daniel N. Pascual*
Affiliation:
North America Applications Center SUSS MicroTec 228 Suss Drive Waterbury Center, VT 05677, U.S.A.
Get access

Abstract

This study explores the effects of softbake parameters including temperature and duration on the homogeneity and toughness of a Benzocyclobutene (BCB) adhesive bond. Experiments were initially performed on silicon wafer pieces and then verified using quartered wafers bonded on a different machine. A four-point bend delamination test was employed to quantitatively measure interface toughness while uniformity was analyzed visually. A softbake temperature of 150 °C for 10 minutes yielded strong void-free bonds with an interface toughness of 23 J/m2.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 782: Symposium A – Micro- and Nanosystems , 2003 , A5.20
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Schmidt, M. A., Proceedings of the IEEE, v.86, NO.8, (August 1998)Google Scholar
2. Niklaus, F., Enoksson, P., Kalvesten, E., and Stemme, G., J. Micromech. Microeng. 11, 100–107 (2001)Google Scholar
3. Chou, T.-K. A., Najafi, K., The 11th International Conference on Solid-State Sensors and Actuators, Munich, Germany, June 10–14, (2001)Google Scholar
4. Niklaus, F., Andersson, H., Enoksson, P., Stemme, G., Sensors & Actuators A, Vol 92, 235–241, (2001).Google Scholar
5. Processing Procedures for CYCLOTENE 4000 Series Resin (Immersion Develop), The Dow Chemical Company, (2001).Google Scholar
6. Charalambides, P.G., Lund, J., Evans, A.G., and McMeeking, R.M., Journal of Applied Mechanics, vol. 56, 77–82 (March 1989)Google Scholar
7. Pantelidis, D. et al., Mat. Res. Soc. Proc. Vol. 535, 165–170 (1999)Google Scholar
8. Jenkins, M., Snodgrass, J., Dauskardt, R. H., and Bravman, J. C., Mat. Res. Soc. Proc. Vol. 629, FF5.12.1–FF5.12.6 (1999)Google Scholar