Hostname: page-component-6bf8c574d5-rwnhh Total loading time: 0 Render date: 2025-02-19T11:53:26.245Z Has data issue: false hasContentIssue false
  • English
  • Français

Direct observations of the sintering of silver nanoparticles on single crystal copper by in-situ uhv tem

Published online by Cambridge University Press:  10 February 2011

M. Yeadon ,
J. C. Yang ,
R. S. Averback ,
J. W. Bullard  and
J. M. Gibson
M. Yeadon
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana IL 61801
J. C. Yang
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana IL 61801
R. S. Averback
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana IL 61801
J. W. Bullard
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana IL 61801
J. M. Gibson
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana IL 61801
Get access

Abstract

Using a novel ultrahigh vacuum (UHV) transmission electron microscope with in-situ UHV sputtering attachment we have studied the sintering of copper and silver nanoparticles with single crystal copper substrates. Copper and silver particles deposited on (001) copper initially assume random orientations. Upon annealing, however, the particles reorient and assume an epitaxial orientation with the substrate. In the case of copper on copper, homoepitaxy occurs by a process involving sintering and grain growth. In the case of silver on copper, we have observed the particles to wet the substrate surface and sinter to form a thin epitaxial film with the orientation relationship (111)Ag // (001)Cu, [110]Ag // [110]Cu.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 501: Symposium FF – Surface Controlled Nanoscale Materials for High-Added… , 1997 , 283
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Edelstein, A.S. and Cammarata, R.C., Nanomaterials: Synthesis, Properties and Applications, IOP, Bristol, 1996 Google Scholar
[2] Olynick, D.L., Gibson, J.M. and Averback, R.S., Mater. Sci. Eng. A 204, p. 54, 1995 Google Scholar
[3] Herman, G., Gleiter, H., Baro, G., Acta Metall., 1976, 24, 353.Google Scholar
[4] Sauter, H., Gleiter, H., and Baro, G., Acta Metall. 1977, 25, 467 Google Scholar
[5] Yeadon, M., Yang, J.C., Bullard, J.W., Averback, R.S., and Gibson, J.M., Appl. Phys. Lett., 71, 1631 (1997).Google Scholar
[6] McDonald, M.L., Gibson, J.M. and Unterwald, F.C., Rev. Sci. Instrum. 60, 700 (1989)Google Scholar
[7] Francis, S.M., Leibsle, F.M., Haq, S., Xiang, N. and Bowker, M., Surf Sci 315, 284 (1994).Google Scholar
[8] Yang, J.C., Yeadon, M., Kolasa, B. and Gibson, J.M., Appl. Phys. Lett. 70, 3522 (1997).Google Scholar
[9] Nowicki, M. and Mroz, S., Vacuum 47, 445 (1996).Google Scholar
[10] Tobin, J.G., Robey, S.W., Klebanoff, L.E. and Shirley, D.A., Phys. Rev. B 28, 6169 (1993).Google Scholar
[11] Naumovic, D., Aebi, P., Stuck, A., Scwaller, P., Osterwalder, J. and Schlapbach, L., Surf. Sci. 307–309, 483 (1994).Google Scholar