Hostname: page-component-6bf8c574d5-gr6zb Total loading time: 0 Render date: 2025-02-14T12:16:05.606Z Has data issue: false hasContentIssue false
  • English
  • Français

Corrosion of Copper-Based Materials in Irradiated Moist air Systems

Published online by Cambridge University Press:  28 February 2011

Donald T. Reed  and
Richard A. Van Konynenburg
Donald T. Reed
Affiliation:
Chemical Technology Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439–4837
Richard A. Van Konynenburg
Affiliation:
Lawrence Livermore National Laboratory, P. O. Box 808, Livermore, CA 94550
Get access

Abstract

The atmospheric corrosion of oxygen-free copper (CDA-102), 70/30 copper-nickel (CDA-715), and 7% aluminum bronze (CDA-613) in an irradiated moist air environment was investigated. Experiments were performed in both dry and 40% RH (@90°C) air at temperatures of 90 and 150°C. Initial corrosion rates were determined based on a combination of weight gain and weight loss measurements. Corrosion products observed were identified. These experiments support efforts by the Yucca Mountain Project (YMP) to evaluate possible metallic barrier materials for nuclear waste containers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 212: Symposium P – Scientific Basis for Nuclear Waste Management XIV , 1990 , 317
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Leidheiser, H., The Corrosion of Copper, Tin and Their Alloys, John Wiley and Sons, Inc., New York (1971).Google Scholar
2. Gdowski, G. E. and Bullen, D. B., “Survey of Degradation Modes of Candidate Materials for High-Level Radioactive-Waste Disposal Containers, Oxidation and Corrosion,” Lawrence Livermore National Laboratory report UCID-21362, vol. 2 (1988).Google Scholar
3. Reed, D. T., Swayambunathan, V., Tani, B. S., and Van Konynenburg, R. A., “Corrosion Production Identification and Relative Rates of Corrosion of Candidate Metals 1n an Irradiated Air-Steam Environment,” Mat. Res. Soc. Symp. Proc. Vol. 176, 517 (1990).Google Scholar
4. “Feasibility Assessment of Copper-Based Waste Package Container Materials in a Repository in Basalt, “Rockwell Hanford Operations report S0-BWI-TA-023 (1986).Google Scholar
5. Yunker, W. H. and Glass, R. S., “Long-Term Corrosion Behavior of Copper-Base Materials in a Gamma Irradiated Environment,” Mat. Res. Soc. Symp. Proc. Vol. 84, 579 (1987).Google Scholar
6. Byalobzheskii, A. V., Radiation Corrosion, Izdatel1’ Stuo “Nauk,” Moskua (1976).Google Scholar
7. O’Neal, W. C., Gregg, D. W., Hockman, J. N., Russell, E. W., and Stein, W., “Preclosure Analysis of Conceptual Waste Package Designs for a Nuclear Waste Repository in Tuff,” Lawrence Livermore National Laboratory report UCRL-53595 (1984).Google Scholar
8. Tracy, A. W., “Symposium on Atmospheric Corrosion of Non-Ferrous Metals,” ASTM-STP No. 175, 67 (1955).Google Scholar