Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Kawamura, Yoshihito
Mano, Hideo
and
Inoue, Akihisa
2000.
Synthesis of ZrC/Zr55Al10Ni5Cu30 metallic-glass matrix composite powders by high pressure gas atomization.
Scripta Materialia,
Vol. 43,
Issue. 12,
p.
1119.
Kawamura, Yoshihito
and
Ohno, Yasuhide
2001.
Superplastic bonding of bulk metallic glasses using friction.
Scripta Materialia,
Vol. 45,
Issue. 3,
p.
279.
Kawamura, Yoshihito
and
Ohno, Yasuhide
2001.
Spark welding of Zr55Al10Ni5Cu30 bulk metallic glasses.
Scripta Materialia,
Vol. 45,
Issue. 2,
p.
127.
Chen, Ho-Sou
Kato, Hidemi
and
Inoue, Akihisa
2002.
Obsevations Ofstress-Induced Structuraldisorder and Fictive Stress in Bulk Metallic Glasses.
MRS Proceedings,
Vol. 754,
Issue. ,
BASKOUTAS, S.
KAPAKLIS, V.
and
POLITIS, C.
2002.
BULK AMORPHOUS Zr57Cu20Al10Ni8Ti5 AND Zr55Cu19Al8Ni8Ti5Si5 ALLOYS PREPARED BY ARC MELTING.
International Journal of Modern Physics B,
Vol. 16,
Issue. 24,
p.
3707.
Inoue, Akihisa
and
Shen, Baolong
2002.
Formation and Soft Magnetic Properties of Fe-B-Si-Zr Bulk Glassy Alloys with High Saturation Magnetization above 1.5 T.
MATERIALS TRANSACTIONS,
Vol. 43,
Issue. 9,
p.
2350.
Mathaudhu, Suveen N.
Im, Jae Taek
Barber, Robert E.
Anderson, Iver E.
Karaman, Ibrahim
and
Ted, K.
2002.
Progress in Consolidation of Amorphous Zr-based Powder into Bulk Metallic Glass.
MRS Proceedings,
Vol. 754,
Issue. ,
Perepezko, John H.
and
Hebert, Rainer J.
2002.
Amorphous aluminum alloys—synthesis and stability.
JOM,
Vol. 54,
Issue. 3,
p.
34.
BASKOUTAS, S.
LEMIS-PETROPOULOS, P.
KAPAKLIS, V.
KOVEOS, Y.
and
POLITIS, C.
2003.
NANOSTRUCTURED AND BULK AMORPHOUS Zr-BASED ALLOYS PREPARED BY MECHANICAL ALLOYING AND ARC MELTING.
International Journal of Modern Physics B,
Vol. 17,
Issue. 10,
p.
2035.
Guo, Faqiang
Poon, S. Joseph
and
Shiflet, Gary J.
2003.
Metallic glass ingots based on yttrium.
Applied Physics Letters,
Vol. 83,
Issue. 13,
p.
2575.
Kato, Hidemi
Inoue, Akihisa
and
Chen, H. S.
2003.
Heating and Structural Disordering Effects of the Nonlinear Viscous Flow in a Zr55Al10Ni5Cu30 Bulk Metallic Glass.
MRS Proceedings,
Vol. 806,
Issue. ,
Kawamura, Y.
Shoji, T.
and
Ohno, Y.
2003.
Welding technologies of bulk metallic glasses.
Journal of Non-Crystalline Solids,
Vol. 317,
Issue. 1-2,
p.
152.
Madge, S.V.
Alexander, D.T.L.
and
Greer, A.L.
2003.
An EFTEM study of compositional variations in Mg–Ni–Nd bulk metallic glasses.
Journal of Non-Crystalline Solids,
Vol. 317,
Issue. 1-2,
p.
23.
Kawamura, Y.
2004.
Liquid phase and supercooled liquid phase welding of bulk metallic glasses.
Materials Science and Engineering: A,
Vol. 375-377,
Issue. ,
p.
112.
Kagao, Shinya
Kawamura, Yoshihito
and
Ohno, Yasuhide
2004.
Electron-beam welding of Zr-based bulk metallic glasses.
Materials Science and Engineering: A,
Vol. 375-377,
Issue. ,
p.
312.
Shoji, Takuo
Kawamura, Yoshihito
and
Ohno, Yasuhide
2004.
Friction welding of bulk metallic glasses to different ones.
Materials Science and Engineering: A,
Vol. 375-377,
Issue. ,
p.
394.
Giessen, Bill C.
and
Hidalgo, Rafael
2005.
Encyclopedia of Inorganic Chemistry.
Kazimirov, V. Yu.
Louca, Despina
Ponnambalam, V.
Poon, S. J.
and
Proffen, T.
2005.
Modeling the atomic structure of amorphous steels using crystalline approximants.
Physical Review B,
Vol. 72,
Issue. 5,
Guo, F. Q.
Poon, S. J.
and
Shiflet, G. J.
2005.
Enhanced bulk metallic glass formability by combining chemical compatibility and atomic size effects.
Journal of Applied Physics,
Vol. 97,
Issue. 1,
Ohkubo, T.
Shoji, S.
Kawamura, Y.
and
Hono, K.
2005.
Nanostructure analysis of friction welded Pd–Ni–P/Pd–Cu–Ni–P metallic glass interface.
Scripta Materialia,
Vol. 53,
Issue. 5,
p.
493.