Hostname: page-component-6bf8c574d5-9nwgx Total loading time: 0 Render date: 2025-02-15T10:17:04.645Z Has data issue: false hasContentIssue false
  • English
  • Français

Microscratch Test for Ultra-Thin Films

Published online by Cambridge University Press:  16 February 2011

T. W. Wu
T. W. Wu*
Affiliation:
IBM Research Division, Almaden Research Center, San Jose, CA 95120.
Get access

Abstract

In a microscratch test performed by using an upgraded microindenter, the normal load, tangential load, scratch length and acoustic emission, are monitored simultaneously during an entire scratch process for the purposes of measuring the critical load and studying the ffilure mechanisms of the deposited films. The adhesion strength, scratch hardness, fracture toughness and friction are the mechanical properties which are possible to obtain by using this technique. Results from aluminum, carbon and zirconia coatings will be discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 188: Symposium K – Thin Films: Stresses and Mechanical Properties II , 1990 , 191
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hardwick, D.A., Thin Solid Films 154, 109(1987)Google Scholar
2. Hoffman, R.W., Mat. Soc. Symp. Proc. 130,295(1989).Google Scholar
3. Rosenmayer, C.T., Brotzen, F R. and Fgale, R. Mat Res. Soc. Symp. Proc. 130, 77(1989).Google Scholar
4. T.P. Weihs ong, S., Bravman, J.C. and Nix, W. D., J. Mater. Res. 3,931(1988)Google Scholar
5. List, F.A. and McKee, R.A., Thin Solid Films 151, 17(1987).Google Scholar
6. Newey, D., Wilkins, M A. and. Pollock, M.,.J Phys. E: Sci. Instrum. 15,119(1982).Google Scholar
7. Pethica, J., Hutchings, R. and Oliver, W.C., Philos.Mag. A 48,593(1983).Google Scholar
8. Hannula, S.-P., Stone, D. and Li, C.-Y Mat. Soc. Symp. Proc. 40,217(1985).Google Scholar
9. T.W. Wu C. Hwang Lo, I. and Alexopoulos, P.S. Thin Solid Films 166,299(1988); IBM Research Report, RJ 6195 (1988).Google Scholar
10. Wu, T.W., Burn, R.A., Chen, M.M. and Alexopoulos, P.S., Mat. Soc. Symp. Proc. 130 117(1989); IBM Research Report RI 6595 (1988).Google Scholar
11. Doerner, M. F. and Nix, W.D. J. Mater. Res. 1 601(1986).Google Scholar
12. Benjamin, P. and Weaver, C., Proc. R. Soc. London A 274, 267(1960).Google Scholar
13. A.J. Perry Valli, J. and Steinmann, P.A., Surf. Coatings.Technol. 36, 559(1988).Google Scholar
14. Sekler, J.,.Steinmann, A. and Hintermann, , Surf. Coatings Technol 36, 519(1988).Google Scholar
15. Bull, S.J., Rickerby, D.S., Matthews, A., Leyland, A, Pace, A.R. and Valli, T., Surf. Coatings Technol. 36, 503(1988).Google Scholar
16. Ricker-by, D.S., Surf. Coatings Technol. 36 541(1988).Google Scholar
17. Hamilton, G.M. and Goodman, L.E. J. Appl. Mech. 33 371(1966)Google Scholar
18. O'Sullivan, T.C. and King, R B., J. Tribol. 110,235 (1988); IBM Research Report, RJ 5363 (1986).Google Scholar
19. Wu, T.W., Shull, A.L. and Lin, J., to be presented at the 1990 MRS Spring Meeting, San Francisco CA 1990.Google Scholar
20. Perry, A.J., Surf. Eng. 2 183(1986).Google Scholar
21. Hammer, B. Perry, A.J.,Laeng, P. and Steinmann, P.A., Thin Solid Films 96,45(1982).Google Scholar
22. Valli, J., J. Vac. Sci. Technol. A 4 3007(1986).Google Scholar
23. Steinmann, P.A. Tardy, Y., Hlintermann, H E., Thin Solid Films 154 333(1987).Google Scholar
24. Oroshnik, J. and Croll, W.K., in Adhesion Measurement of Think Films, Thick Films and Bulk Coatings, edited by Mittal, K.L. (S T P 640 ASTM, Philadelphia, PA, 1978), p. 159.Google Scholar
25. Ogawa, K., Ohkoshi, T, Takeuchi, T., Mizoguchi, T. and Masumoto, T., Japan..J. Appl. Phys. 25, 695 (1986)Google Scholar
26. Nir, D.,Thin Solid Films 112, 41(1984).Google Scholar
27. Lawn, B.R. and Wilshaw, R., J,. Mater. Sci. 10 1049(1975).Google Scholar
28. Marshall, D.B. and Lawn, B.R., J. Mater. Res 14, 2001(1979).Google Scholar
29. Rice, J.R., J.AppI. Mech. 55 98(1988).Google Scholar
30. Evan, A.G., Drory, M.D. and Hu, M. S., J. Mater. Res. 3,1043 (1988).Google Scholar
31. Tabor, D., in The Hardness of Metals, (Clarendon Press Oxford, 1951), p. 8.Google Scholar
32. Wu, T.W., Moshrel, M. and Alexopoulos, P.S., to be published in Thin Solid Film, Section B; IBM Research Report RJ 6768 (1989).Google Scholar
33. Teer, D.G. and Arnell, R.D., in Principles of Tribology, edited by Hailing, J., (The MacMillan Press Ltd., 1978), p. 72.Google Scholar
34. Lemons, R.A. and Quate, C.F. Appl. Phys. Lett. 24, 163(1977).Google Scholar
35. Nikoonahad, M. Contemp. Phys. 25, 129(1984).-Google Scholar
36. Yan, A.C.M. Wu, T.W. and Scott, J.C., presented at the 1989 Amer. Phys. Soc. Meeting, St. Louis, MO, 1989 (unpublished).Google Scholar