Article contents
Electrical and Microwave Properties of Mn Implanted (Ba,Sr)TiO3 Thin Films
Published online by Cambridge University Press: 10 February 2011
Abstract
We have used ion implantation to dope polycrystalline BaxSr(1−x)TiO3 (BST) thin films with Mn. Dopant concentrations were varied in the range of 0.1 at % to 2 at % Mn. X-ray diffraction and TEM studies show that the implantation process significantly damages the film leaving only short range order, but subsequent rapid thermal annealing heals the damage. The effect of the different Mn dopant concentrations on the electrical properties of the complex capacitance, relaxation currents, leakage, C-V, and resistance degradation was investigated. Our initial results show that the implanted films have significantly lower leakage (up to a factor of 10 lower) than the as deposited films for small (<0.5 at % Mn) implantation doses. The capacitance decreased with increasing Mn concentration while the relaxation currents and loss tangents increased.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1998
References
REFERENCES
- 2
- Cited by