Hostname: page-component-6bf8c574d5-qdpjg Total loading time: 0 Render date: 2025-02-15T10:01:02.567Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Solidified Radioactive Waste Due to the Incorporation of High-and Low-Density Polyethylene Granules and Titanium Dioxide in Mortar Matrices

Published online by Cambridge University Press:  03 September 2012

Aleksandar Perić
Aleksandar Perić*
Affiliation:
Institute of nuclear sciences “Vinča”, P.O. Box 522, 11001 Belgrade, Yugoslavia
Get access

Abstract

The rutile form of titanium dioxide (TiO2) and granules of high density polyethylene (PEHD) and low density polyethylene (PELD) were used to prepare mortar matrices for immobilization of radioactive waste materials containing ‘137Cs. PELD,PEHD and TiO2 were added to mortar matrix preparations with the objective of improving physico-chemical characteristics of the radwaste-mortar matrix mixtures, in particular the leach-rate of the immobilized radionuclide. The diameters of the PELD and PEHD used varied from 0.2 to 2.0 mm. One type of PELD and two types of PEHD were used to replace 50 weight percent of stone granules, average diameter of 2 mm, normally used in the matrix, in order to decrease the porosity and density of the mortar matrix and to avoid segregation of the stone particles at the bottom of the immobilized radioactive waste cylindrical form. TiO2 was also added to the mortar formulation, replacing 5 and 8 weight percent of the total cement weight, for each PEHD and PELD formulation. Cured samples were investigated under temperature stress conditions, where the temperature extremes were: Tmill = -20°C,Tmax= +70°C. Samples were periodically immersed in distilled water at the ambient room temperature, after each freezing and heating treatment. Results of accelerated leaching experiments for these samples and samples prepared exclusively with polyethylenes replacing 100 percents of the stone granules and TiO2, treated in nonaccelerated leaching experiments, were compared. Even using an accelerated ageing leach test that overestimates 137Cs leach rates, it can be deduced, that radionuclide leach rates from the radioactive waste mortar mixture forms were improved. Leach rates decreased from 5 percent, for the material prepared with stone aggregate, to 3.1 to 4.0 percent, for the materials prepared solely with PEHD, PELD or TiO2, and to about 3 percents for all six types of the TiO2-PEHD and TiO2-PELD mixtures tested.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 465: Symposium II – Scienfific Basis for Nuclear Waste Management XX , 1996 , 311
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mawson, C.A., Management of Radioactive Wastes (D. van Nostrana Company Inc., London, 1965).Google Scholar
2. Tallberg, K., Aitola, P., IAEA SM-207/78, 1978.Google Scholar
3. IAEA, Technical Reports Series No.222, 1981.Google Scholar
4. Hespe, E., Atomic Energy Rev. 9 (1), 195 (1971).Google Scholar
5. EC, Second Annual Progress Report of the European Community Programme: 1980–1984. Research and Development on Radioactive Waste Management and Storage, Radioactive Waste Management, 8 (1981).Google Scholar
6. Bernard, A., Nomine, J.C., Cornee, G., Bonnett, A., Farges, A., Nuclear and Chemical Waste Management 3, 161 (1982).Google Scholar
7. Amarantos, S.G., Papadokostaki, K.G., Petropoulos, J.H., CEC Report WAS-305–83–15-GR(B), 1984.Google Scholar
8. Hung, C.Y., Nucl. Chem. Waste Management, 3, 235 (1982).Google Scholar
9. Perić, A.D., Report on IAEA fellowship, Proposal for the Project “Lyssia”,(1991).Google Scholar
10. Perić, A.D., Plećaš, I.B., Pavlovic, R.S., Pavlović, S.D. in Scientific Basis for Nuclear Waste Management XVI, edited by Barkatt, Aaron and Van Konynenburg, Richard A. (Material Research Society Proc. 333, Pittsburg, PA, 1993) pp. 377–382.Google Scholar
11. IAEA, Safety Series No.63, 1984.Google Scholar
12. IAEA, “Waste Disposal in Shallow Land Burial”, Interregional training course, KfK, Karlsruhe, 1989.Google Scholar
13. Perić, A. et al. , in Radioactive waste management practices and issues in developing countries, edited by Tsyplenkov, Vladimir, (IAEA Proc. 851, Vienna, Austria 1995) pp. 223–227.Google Scholar
14. Aleksandar Perić, D., in Scientific Basis for Nuclear Waste Management XIX, edited by Murphy, William M. and Knecht, Dieter A. (Mat Res. Soc. Proc. 412, Pittsburg, PA 1995) pp. 429–433.Google Scholar
15. Aleksandar Perić, D., Plećaš, Ilija B., Pavlović, Radojko S., Environmental International, 22, 6, (1996).Google Scholar
16. Perić, A.D., Plecas, I.B. and Pavlović, R.S., in International Symposium on The Scientific Basis for Nuclear Waste Management, edited by Murakami, Tokashi and Ewing, Rodney C., (Mat. Res. Soc. Proc. 353, Pittsburgh, PA, 1994) pp. 907–911.Google Scholar
17. Perić, A., Plecas, I., in Resúmenes de las ponencias presentadas en la XX Reunion Anual de la Sociedad Nuclear Española, (Spanish Nuclear Soc. Proc. 20, Madrid, Spain, 1994) pp. 223–224.Google Scholar
18. Perié, Aleksandar, in IRPA'9 International Congress on Radiation Protection, (Inter. Rad. Prot. Ass. Proc. Vol. 11, Vienna, Austria, 1996) pp. 768–770.Google Scholar