Hostname: page-component-745bb68f8f-l4dxg Total loading time: 0 Render date: 2025-02-10T16:12:59.804Z Has data issue: false hasContentIssue false
  • English
  • Français

Microwave-assisted synthesis of Nb2O5 for photocatalytic application of nanopowders and thin films

Published online by Cambridge University Press:  27 March 2017

Gilberto Falk ,
Mario Borlaf ,
María José López-Muñoz ,
Juan Carlos Fariñas ,
João Batista Rodrigues Neto  and
Rodrigo Moreno
Gilberto Falk
Affiliation:
Department of Mechanical Engineering, Federal University of Santa Catarina, Florianópolis 88040-900, SC, Brazil
Mario Borlaf
Affiliation:
Department of Mechanical Engineering, Federal University of Santa Catarina, Florianópolis 88040-900, SC, Brazil
María José López-Muñoz
Affiliation:
Department of Chemical and Environmental Technology, Rey Juan Carlos University, Móstoles 28933, Madrid, Spain
Juan Carlos Fariñas
Affiliation:
Institute of Ceramics and Glass, CSIC, Madrid 28049, Spain
João Batista Rodrigues Neto
Affiliation:
Department of Mechanical Engineering, Federal University of Santa Catarina, Florianópolis 88040-900, SC, Brazil
Rodrigo Moreno*
Affiliation:
Institute of Ceramics and Glass, CSIC, Madrid 28049, Spain
*
a)Address all correspondence to this author. e-mail: rmoreno@icv.csic.es
Get access

Abstract

A new rapid and energy saving method for the obtention of high performance nanoparticles and thin films of Nb2O5 by microwave-assisted hydrothermal synthesis is reported. The hydrothermal treatment of a sol–gel precursor solution in a microwave oven at 180 °C for 20 min was enough to obtain amorphous nanoparticles with average sizes of 40 nm. The calcination promotes the formation of different phases of Nb2O5 (TT and T) with pseudohexagonal and orthorhombic structure, respectively, that transform at higher temperatures in a mixture of orthorhombic and monoclinic phases. Crystalline phase composition was found to have a significant influence on the photocatalytic activity. The best photocatalytic performance was observed for the material mainly constituted by the TT-Nb2O5 phase. Thin films constituted by the TT phase were prepared by dip-coating. Photocatalytic experiments confirmed the high photocatalytic activity of this material, which showed a kinetic curve similar to that of a reference TiO2-P25 thin film.

Keywords

Nbmicrowave heatingfilm
Type
Invited Articles
Information
Journal of Materials Research , Volume 32 , Issue 17: Focus Issue: Achieving Superior Ceramics and Coating Properties through Innovative Processing , 14 September 2017 , pp. 3271 - 3278
Check for updates
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

b)

Current Address: Empa, Laboratory for High Performance Ceramics, 8600 Dübendorf, Switzerland.

Contributing Editor: Eugene Medvedovski

References

REFERENCES

Liu, B., Wang, H., Chen, Y., Wang, J., Peng, L., and Li, L.: Pt nanoparticles anchored on Nb2O5 and carbon fibers as an enhanced performance catalyst for methanol oxidation. J. Alloys Compd. 682, 584 (2016).CrossRefGoogle Scholar
Aegerter, M.A.: Sol–gel niobium pentoxide: A promising material for electrochromic coatings, batteries, nanocrystalline solar cells and catalysis. Sol. Energy Mater. Sol. Cells 68, 401 (2001).Google Scholar
Lübke, M., Sumboja, A., Johnson, I.D., Brett, D.J.L., Shearing, P.R., Liu, Z., and Darr, J.A.: High power nano-Nb2O5 negative electrodes for lithium-ion batteries. Electrochim. Acta 192, 363 (2016).Google Scholar
Kim, H.K., Mhamane, D., Kim, M.S., Roh, H.K., Aravindan, V., Madhavi, S., Roh, K.C., and Kim, K.B.: TiO2-reduced graphene oxide nanocomposites by microwave-assisted forced hydrolysis as excellent insertion anode for Li-ion battery and capacitor. J. Power Sources 327, 171 (2016).CrossRefGoogle Scholar
Cho, T.Y., Ko, K.W., Yoon, S.G., Sekhon, S.S., Kang, M.G., Hong, Y.S., and Han, C.H.: Efficiency enhancement of flexible dye-sensitized solar cell with sol–gel formed Nb2O5 blocking layer. Curr. Appl. Phys. 13(7), 1391 (2013).Google Scholar
Shen, Z., Wang, G., Tian, H., Sunarso, J., Liu, L., Liu, J., and Liu, S.: Bi-layer photoanode films of hierarchical carbon-doped brookite-rutile TiO2 composite and anatase TiO2 beads for efficient dye-sensitized solar cells. Electrochim. Acta 216, 429 (2016).Google Scholar
Ueno, S. and Fujihara, S.: Effect of an Nb2O5 nanolayer coating on ZnO electrodes in dye-sensitized solar cells. Electrochim. Acta 56(7), 2906 (2011).Google Scholar
Chao Liang, G.S., Wu, Z., Li, P., Fan, J., and Zhang, Y.: Chemical bath deposited rutile TiO2 compact layer toward efficient planar heterojunction perovskite solar cells. Appl. Surf. Sci. 391, 2 (2016).Google Scholar
Belver, C., Bedia, J., and Rodriguez, J.J.: Zr-doped TiO2 supported on delaminated clay materials for solar photocatalytic treatment of emerging pollutants. J. Hazard. Mater. 322, 233 (2015).Google Scholar
Lopes, O.F., Paris, E.C., and Ribeiro, C.: Synthesis of Nb2O5 nanoparticles through the oxidant peroxide method applied to organic pollutant photodegradation: A mechanistic study. Appl. Catal., B 144, 800 (2014).CrossRefGoogle Scholar
Karunakaran, C., Dhanalakshmi, R., Gomathisankar, P., and Manikandan, G.: Enhanced phenol-photodegradation by particulate semiconductor mixtures: Interparticle electron-jump. J. Hazard. Mater. 176, 799 (2010).Google Scholar
Graca, M.P.F., Meireles, A., Nico, C., and Valente, M.A.: Nb2O5 nanosize powders prepared by sol–gel—Structure, morphology and dielectric properties. J. Alloys Compd. 553, 177 (2013).Google Scholar
Ziolek, M.: Niobium-containing catalysts—The state of the art. Catal. Today 78(1–4), 47 (2003).Google Scholar
Yue, Z., Liu, A., Zhang, C., Huang, J., Zhu, M., Du, Y., and Yang, P.: Noble-metal-free hetero-structural CdS/Nb2O5/N-doped-graphene ternary photocatalytic system as visible-light-driven photocatalyst for hydrogen evolution. Appl. Catal., B 201, 202 (2017).Google Scholar
Hashemzadeh, F., Rahimi, R., and Ghaffarinejad, A.: Mesoporous nanostructures of Nb2O5 obtained by an EISA route for the treatment of malachite green dye-contaminated aqueous solution under UV and visible light irradiation. Ceram. Int. 40(7), 9817 (2014).Google Scholar
Oliveira, L.C.A., Oliveira, H.S., Mayrink, G., Mansur, H.S., Mansur, A.A.P., and Moreira, R.L.: One-pot synthesis of CdS@Nb2O5 core–shell nanostructures with enhanced photocatalytic activity. Appl. Catal., B 152–153(1), 403 (2014).Google Scholar
Jiang, H., Liu, Y., Zang, S., Li, J., and Wang, H.: Microwave-assisted hydrothermal synthesis of Nd, N, and P tri-doped TiO2 from TiCl4 hydrolysis and synergetic mechanism for enhanced photoactivity under simulated sunlight irradiation. Mater. Sci. Semicond. Process. 40, 822 (2015).Google Scholar
Lam, S.M., Sin, J.C., Satoshi, I., Abdullah, A.Z., and Mohamed, A.R.: Enhanced sunlight photocatalytic performance over Nb2O5/ZnO nanorod composites and the mechanism study. Appl. Catal., A 471, 126 (2014).Google Scholar
Falk, G., Borlaf, M., Bendo, T., Novaes de Oliveira, A.P., Rodrigues Neto, J.B., and Moreno, R.: Colloidal sol–gel synthesis and photocatalytic activity of nanoparticulate Nb2O5 sols. J. Am. Ceram. Soc. 99(6), 1968 (2016).Google Scholar
Tang, C., Liu, L., Li, Y., and Bian, Z.: Aerosol spray assisted assembly of TiO2 mesocrystals into hierarchical hollow microspheres with enhanced photocatalytic performance. Appl. Catal., B 201, 41 (2017).Google Scholar
Mirzaei, A. and Neri, G.: Microwave-assisted synthesis of metal oxide nanostructures for gas sensing application: A review. Sens. Actuators, B 237, 749 (2016).Google Scholar
Zhu, X.H. and Hang, Q.M.: Microscopical and physical characterization of microwave and microwave-hydrothermal synthesis products. Micron 44(1), 21 (2013).CrossRefGoogle ScholarPubMed
Meng, L.Y., Wang, B., Ma, M.G., and Lin, K.L.: The progress of microwave-assisted hydrothermal method in the synthesis of functional nanomaterials. Mater. Today Chem. 1–2, 63 (2016).Google Scholar
Bhattacharya, M. and Basak, T.: A review on the susceptor assisted microwave processing of materials. Energy 97, 306 (2016).Google Scholar
Lin, H. and Shih, C.: Chemical efficient one-pot microwave-assisted hydrothermal synthesis of M (M = Cr, Ni, Cu, Nb) and nitrogen co-doped TiO2 for hydrogen production by photocatalytic water splitting. J. Mol. Catal. A: Chem. 411, 128 (2016).Google Scholar
Yang, H., Xu, H., Wang, L., Zhang, L., Huang, Y., and Hu, X.: Microwave-assisted rapid synthesis of self-assembled T-Nb2O5 nanowires for high-energy hybrid supercapacitors. Chem.–Eur. J. doi: 10.1002/chem.201700010.Google Scholar
Tauc, J.: Absorption edge and internal electric fields in amorphous semiconductors. Mater. Res. Bull. 5(4), 721 (1970).Google Scholar
Valencia-Balvín, C., Pérez-Walton, S., Dalpian, G.M., and Osorio-Guillén, J.M.: First-principles equation of state and phase stability of niobium pentoxide. Comput. Mater. Sci. 81, 133 (2014).Google Scholar
Herval, L.K.S., Von Dreifus, D., Rabelo, A.C., Rodrigues, A.D., Pereira, E.C., Gobato, Y.G., de Oliveira, A.J.A., and Godoy, M.P.F.: The role of defects on the structural and magnetic properties of Nb2O5 . J. Alloys Compd. 653, 358 (2015).Google Scholar
Jehng, J.M. and Wachs, I.E.: Structural chemistry and raman spectra of niobium oxides. Chem. Mater. 3(1), 100 (1991).Google Scholar
Ikeya, T. and Senna, M.: Change in the structure of niobium pentoxide due to mechanical and thermal treatments. J. Non-Cryst. Solids 105(3), 243 (1988).Google Scholar
Nico, C., Soares, M.R.N., Rodrigues, J., Matos, M., Monteiro, R., Graça, M.P.F., Valente, M.A., Costa, F.M., and Monteiro, T.: Sintered NbO powders for electronic device applications. J. Phys. Chem. C 115, 4879 (2011).Google Scholar