Hostname: page-component-745bb68f8f-g4j75 Total loading time: 0 Render date: 2025-02-11T04:31:04.753Z Has data issue: false hasContentIssue false
  • English
  • Français

High Curie temperature perovskite BiInO3–PbTiO3 ceramics

Published online by Cambridge University Press:  03 March 2011

Runrun Duan ,
Robert F. Speyer ,
Edward Alberta  and
Thomas R. Shrout
Runrun Duan
Affiliation:
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332-0245
Robert F. Speyer
Affiliation:
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332-0245
Edward Alberta
Affiliation:
TRS Technologies, State College, Pennsylvania 16801
Thomas R. Shrout
Affiliation:
Materials Research Laboratory, Pennsylvania State University, University Park, Pennsylvania 16802-4800
Get access

Abstract

The extent of BiInO3 substitution in the perovskite system xBiInO3–(1 - x)PbTiO3 and the corresponding raise in the Curie temperature were investigated using thermal analysis, dielectric measurements, x-ray diffraction, and electron microscopy. Maximum tetragonal perovskite distortion (c/a = 1.082) was obtained for x = 0.20, with a corresponding Curie temperature of 582 °C. Phase-pure tetragonal perovskite was obtained for x ⩽ 0.25. Compound formation after calcining mixed oxide powders resulted in agglomerated cube-shaped tetragonal perovskite particles, which could be fired to 94.7% of theoretical density (TD). Sol-gel fabrication resulted in nano-sized tetragonal or pseudo-cubic perovskite particles, which after two-step firing, resulted in a tetragonal perovskite microstructure at as high as (x = 0.20) 98.1% of TD.

Keywords

PiezoelectricSinteringPhase transformation
Type
Articles
Information
Journal of Materials Research , Volume 19 , Issue 7 , July 2004 , pp. 2185 - 2193
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Jaffe, B., Cook, W.R. and Jaffe, H.: Piezoelectric Ceramics (Academic Press, New York, 1971).Google Scholar
2.Turner, R.C., Fuierer, P.A., Newnham, R.E. and Shrout, T.R.Materials for High Temperature Acoustic and Vibration Sensors: A Review. Appl. Acoustics 41, 299 (1994).CrossRefGoogle Scholar
3.Piezoelectric Materials in Devices, edited by Setter, N. (EPFL, Switzerland, 2001).Google Scholar
4.Goldschmidt, V.M. Shrifter Norskevidenskop-Adad. Oslo: Matemot. Natureid Klasse (1926).Google Scholar
5.Eitel, R.E., Randall, C.A., Shrout, T.R., Park, S.E., Rehrig, P. and Hackenberger, W.Jpn. J. Appl. Phys. 40, 5999 (2001).CrossRefGoogle Scholar
6.Cullity, B.D.: Elements of X-Ray Diffraction, 2nd ed. (Addison Wesley, Reading, MA, 1978).Google Scholar
7.Reed, J.S.: Principles of Ceramic Processing, 2nd ed. (John Wiley and Sons, New York, 1995).Google Scholar
8.Levin, E.M., Robbins, C.R. and McMurdie, H.F.: Phase Diagrams for Ceramists (American Ceramic Society, Westerville, OH, 1964).Google Scholar
9.Xu, Y.: Ferroelectric Materials and Their Applications (North-Holland, 1991).Google Scholar