Hostname: page-component-6bf8c574d5-7jkgd Total loading time: 0 Render date: 2025-02-23T10:12:54.288Z Has data issue: false hasContentIssue false
  • English
  • Français

Combined dye-streak and hydrogen-bubble visual observations of a turbulent boundary layer

Published online by Cambridge University Press:  29 March 2006

G. R. Offen  and
S. J. Kline
G. R. Offen
Affiliation:
Department of Mechanical Engineering, Stanford University, California
S. J. Kline
Affiliation:
Department of Mechanical Engineering, Stanford University, California
Get access Rights & Permissions [Opens in a new window]

Abstract

The turbulent boundary layer over a flat plate was observed visually using two dye injectors and a normal bubble wire. One dye injector was a standard wall slot; the other one was a small Pitot probe which could be placed anywhere in the flow. The purpose of these experiments was to improve understanding of the relationships between the bursting of low-speed streaks near the wall and the flow field farther away from the wall.

On the basis of these observations, it seems that (i) each lift-up is associated with a disturbance which originates in the logarithmic region and is characterized by a mean motion towards the wall, and that (ii) such disturbances are generated by the interaction of an earlier burst from further upstream with the fluid motion in the logarithmic region.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 62 , Issue 2 , 23 January 1974 , pp. 223 - 239
Copyright
© 1974 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Corino, E. R. & Brodkey, R. S. 1969 J. Fluid Mech. 37, 1.
Grass, A. J. 1971 J. Fluid Mech. 50, 233.
Kim, H. T., Kline, S. J. & Reynolds, W. C. 1968 Dept. Mech. Engng, Stanford University, Rep. MD-20.
Kim, H. T., Kline, S. J. & Reynolds, W. C. 1971 J. Fluid Mech. 50, 133.
Offen, G. R. & Kline, S. J. 1973 Dept. Mech. Engng, Stanford University, Rep. MD-31.
Rao, K. N., Narasimha, R. & Badri Narayanan, M. A. 1971 J. Fluid Mech. 48, 339.
Runstadler, P. W., Kline, S. J. & Reynolds, W. C. 1963 Dept. Mech. Engng, Stanford Univeristy, Rep. MD-8.
Schraub, F. A. & Kline, S. J. 1965 Dept. Mech. Engng, Stanford University, Rep. MD-12.
Schraub, F. A. Et Al. 1965 J. Basic Engng Trans. A.S.M.E. 87. (See also A.S.M.E. Preprint, FE-20.)
Wallace, J. M., Eckelmann, H. & Brodkey, R. S. 1972 J. Fluid Mech. 54, 39.
Willmarth, W. W. & Lu, S. S. 1972 J. Fluid Mech. 55, 65.