Article contents
The flow in industrial cyclones
Published online by Cambridge University Press: 21 April 2006
Abstract
A simple mathematical model for the flow in a conical cyclone is developed which allows solutions to be obtained in closed form. The flow in the main body of the cyclone is regarded as inviscid but the nature of the fluid entry to the device and the conical geometry ensure that secondary flows develop which make the flow highly rotational. The results of the theory are compared with data from two quite different experimental investigations, and good agreement is obtained.
- Type
- Research Article
- Information
- Copyright
- © 1987 Cambridge University Press
References
Batchelor, G. K.
1956
On steady laminar flow with closed streamlines at large Reynolds number.
J. Fluid Mech.
1,
177.Google Scholar
Batchelor, G. K.
1967
An Introduction to Fluid Dynamics, p.
543.
Cambridge University Press.
Bloor, M. I. G. & Ingham, D. B.
1973
The fluid mechanics of the hydrocyclone.
Trans. Instn Chem. Engrs
51,
36.Google Scholar
Bloor, M. I. G. & Ingham, D. B.
1983
Theoretical aspects of hydrocyclone flow. In
Progress in Filtration and Separation (ed. R. J. Wakeman), vol. 3, p.
57,
Elsevier.
Bradley, D.
1965
The Hydrocyclone,
1st edn.
Pergamon.
Kelsall, D. F.
1952
A study of the motion of solid particles in a hydraulic cyclone.
Trans. Instn Chem. Engrs
30,
87.Google Scholar
Knowles, S. R., Woods, D. R. & Fuerstein, I. A.
1973
The velocity distribution within a hydrocyclone operating without an air core.
Can. J. Chem. Engng
51,
263.Google Scholar
Long, R. R.
1956
Sources and sinks at the axis of a rotating liquid.
Q. J. Mech. Appl. Maths
9,
385.Google Scholar
Riley, N.
1981
High Reynolds number flows with closed streamlines.
J. Engng Maths
15,
15.Google Scholar
- 117
- Cited by