Hostname: page-component-7b9c58cd5d-bslzr Total loading time: 0.001 Render date: 2025-03-16T05:31:11.528Z Has data issue: false hasContentIssue false
  • English
  • Français

Wide-band gain enhancement of a pyramidal horn antenna with a 3D-printed epsilon-positive and epsilon-near-zero metamaterial lens—CORRIGENDUM

Published online by Cambridge University Press:  26 January 2021

N. Keskin ,
S. Aksimsek  and
N. Turker Tokan
Rights & Permissions [Opens in a new window]

Abstract

An abstract is not available for this content. As you have access to this content, full HTML content is provided on this page. A PDF of this content is also available in through the ‘Save PDF’ action button.

Keywords

Antenna designepsilon-near-zerometa-materials and photonic bandgap structuresmodelling and measurementscorrigendum
Type
Metamaterials and Photonic Bandgap Structures
Information
International Journal of Microwave and Wireless Technologies , Volume 13 , Issue 10 , December 2021 , pp. 1024
Check for updates
Copyright
Copyright © The Author(s), 2021. Published by Cambridge University Press in association with the European Microwave Association

The original article was published without full funding information/acknowledgement. Funding information for this article is as follows:

“This work was supported by a research fund of the Yildiz Technical University (Project Number: FYL-FDK-2019-3652).”

In addition, the affiliation address for author Sinan Aksimsek was listed incorrectly and is as follows:

Department of Electrical and Electronics Engineering, Istanbul Kultur University, Bakirkoy 34156, Istanbul, Turkey.

References

Keskin, N, Aksimsek, S and Turker Tokan, N (2020) Wide-band gain enhancement of a pyramidal horn antenna with a 3D-printed epsilon-positive and epsilon-near-zero metamaterial lens. International Journal of Microwave and Wireless Technologies, 1–9. https://doi.org/10.1017/S1759078720001646.CrossRefGoogle Scholar