Hostname: page-component-6bf8c574d5-7jkgd Total loading time: 0 Render date: 2025-02-19T14:48:30.101Z Has data issue: false hasContentIssue false
  • English
  • Français

Simultaneous Spiral Recording of Pole Figures on Polaroid Film for Texture Goniometers

Published online by Cambridge University Press:  06 March 2019

H. Ebel  and
M. F. Ebel
H. Ebel
Affiliation:
Institut für Angewandte Physik Technische Hochsohule Wien, Vienna, Austria
M. F. Ebel
Affiliation:
Institut für Angewandte Physik Technische Hochsohule Wien, Vienna, Austria
Get access

Abstract

The X-ray reflection method according to Schulz is used for investigations of textures in rolled materials. The pole figures are measured either along spirals or along circles. Points of equal intensity are transposed from the record of X-ray intensity to a spiral diagram. Finally contour lines are delineated, pointing out regions of equal pole density. Three ways are known for simplification of the evaluation.

  • a) The results of the measurement are stored, evaluated by a computer and the pole figure is plotted. Points of equal pole density are represented by equal symbols (2 ,3 ).

  • b) The pole figure is recorded synchronously with the X-ray measurement along circles or spirals. Ranges of different pole density are characterized by different colors (4 ,5 ).

  • c) The pole figure is recorded on a photographic film along a spiral. The blackening depends on the measured countrate (6 ,7 ).

An outline on different instruments using photographic registration is given.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 15: Twentieth Annual Conference on Applications of X-ray Analysis, August 11-13, 1971 , 1971 , pp. 499 - 503
Copyright
Copyright © International Centre for Diffraction Data 1971

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Schulz, L. G., “A direct method of determining preferred orientation of a flat reflection sample using a Geiger counter X-ray spectrometer”, J. Appl. Phys. 20, 1030–1033 (1949).Google Scholar
2. Siemes, H., “Ein Rechenprogramm zur Auswertung von Rontgejrtexturaufnahmen, f Neues Jb. Mineralogie 2/3. 49–60 (1967).Google Scholar
3. Segmüller, A. and Angilello, J., “Automatic pole figure evaluation”, IBM Research RC 2296, Nov, 1968.Google Scholar
4. Lücke, K., Siemens Verkaufsprogramm Oktober 1968.Google Scholar
5. Baro, R. and Ruer, D., “An Automatic pole figure recorder” Sci. Instr. (J. Phys. E) 3, 541–543 (1970).Google Scholar
6. Ebel, H. and Ortner, B., “Direct registration of pole diagrams for the determination of textures by X-rays”, J. Sci. Instr. 43, 959–960 (1966).Google Scholar
7. Wagendristel, A., Ebel, H., Marihart, O. and Schneider, W., “Verfahren zur automatischen Darstellung von Polfiguren”, Materialprüfung 12, 337–340 (1970).Google Scholar